Auto Run Mode

Once the desired settings have been selected, the BASE is ready for the cycle to be initiated. To start, press the PLAY button .

*If there is a question mark displayed next to the PLAY button it is an indication that there is a condition inhibiting the cycle from starting.
For more information, press the green QUESTION MARK for more information.

Auto Run Screen

	PRESSURE GAUGE Displays the current pressure of the spray valves in operation.
	pH METER Displays the current pH level of the detergent in the main tank.
	TEMPERATURE Displays the current temperature of the detergent in the tank.
	SPRAY NOZZLES Displays the active spray pattern along with the direction and travel distance of the top spray rack.
	CLOCK Displays the remaining time in the cycle.
	AGA INTENSITY METER A graphic representation of the current energy output of the system, based on the Agitation Algorithm. NOTE: The color and size of this meter will vary with the system energy level throughout the cycle.

!The BASE is designed to detect conditions at the start of an Auto Run cycle that may inhibit performance or safety. See the Alarms and Warning section for full detail.

The Drain and Dose screen may appear prior to the cycle starting. Based on sensor feedback and Configuration settings, this screen indicates an opportunity to improve the volume or pH of the detergent.
In this warning state, the user has the option to take corrective action (DRAIN or DOSE) or proceed as is. To acknowledge the warning and proceed, press CONTINUE.

Drain and Dose Screen