| Line Number | Part | Description |
|---|---|---|
| 1 | PAV-003LG1 | AeroGuard Laser Defense Eyewear |
| 2 | PAV-003LL1 | AeroGuard Laser Defense Outer Visor Lens |
| 3 | PAV-006 | Dual Visor Track Assembly |
| 4 | PAV-003IL.AA | Inner Visor Actuator Arm |
| 5 | PAV-003CIL | Inner Visor Lens, Clear |
| 6 | PAV-003IL | Inner Visor Lens, Tinted |
| 7 | PAV-006.DS.L | Left Detent Spacer |
| 8 | PAV-015LHS | Left Hand Threaded Screw |
| 9 | PAV-006.LTB.1 | Left Visor Track Bottom Version 1 |
| 10 | PAV-006.LTT.1 | Left Visor Track Top Version 1 |
| 11 | PAV-006.NW | Nylon Washer |
| 12 | PAV-003TOL | Outer Lens, Tinted |
| 13 | PAV-003OL | Outer Visor Lens, Clear |
| 14 | PAV-006.VS | Phillips Screw for Visor Cover with Thread Lock |
| 15 | PAV-006.DS.R | Right Detent Spacer |
| 16 | PAV-006.RTB.1 | Right Visor Track Bottom Version 1 |
| 17 | PAV-006.RTT.1 | Right Visor Track Top Version 1 |
| 18 | PAV-006.POST | SS Post, Visor Cover |
| 19 | VA.PAV-014 | Visor Assembly with Lenses & Tracks for Parts Orders Only |
| 20 | PAV-015B | Visor Lock Assembly, Black |
| 21 | PAV-HCOL | Yellow High-Contrast Outer Lens, Amber |
| 22 | PAC-009HF/B-M87 | 1/2 Flex – 1/2 Rail Mic boom, Thumb Screw Connection, Braided |
| 23 | PAC-009HF-M87 | 1/2 Flex – 1/2 Rail Mic Boom, Thumb Screw Connection, Non-Braided |
| 24 | PAC-001/CS | 3’ Coiled Downlead for SPH Series Helmet, U-174/U |
| 25 | PAC.HLC-PT172.6 | 6” cable lead terminate to U-172/U on one end |
| 26 | PAC.HLC-PT173.6 | 6” cable lead terminate to U-173/U on one end |
| 27 | PAC-009HF/B | Braided Half Flex Boom |
| 28 | PANR-4217B | Braided Lightspeed Kevlar Harness with Quick Disconnect |
| 29 | PAC-009HF/B | Braided Half Flex Boom |
| 30 | CEP-100K | CEP IHADSS Kit; Dongle Interface, Plugs, and Tips |
| 31 | PANR-LZ.CEP | CEP Integration Kit for Lightspeed |
| 32 | PAC-001.ECGROM | Earcup Grommet |
| 33 | PAC-009/DC | David Clark Hybrid Flex Boom Assembly Non-thumb Screw |
| 34 | PAC-009/DC2 | David Clark Hybrid Flex Boom Assembly Thumb Screw |
| 35 | PAC-001.VC/POT | Completed Volume Control Pot with Connector |
| 36 | PANR-4213.L | Contoured Ear Cup, Left |
| 37 | PANR-4213.R | Contoured Ear Cup, Right |
| 38 | PAC-09168P-88 | David Clark DC87 (M-87) 5 Ohm Mic |
| 39 | PAC-004D | Dynamic Mic Muff, Basic |
| 40 | PAC-004E | Electret Mic Muff, Basic |
| 41 | PAC-004C | UmeCobra Mic Muff, Basic |
| 42 | PAC-008/19 | Earphone Assembly, 19 ohm |
| 43 | PAC-008/300 | Earphone Assembly, 300 ohm |
| 44 | PAC-002/EN | Extreme High Noise Electret Microphone |
| 45 | PAC-009HF/B-M101 | Flex Rail Mic Boom for M-101, Braided |
| 46 | PAC-009HF-M101 | Flex Rail Mic Boom for M-101, Non-Braided |
| 47 | PAC-001.SHELLGROM | ICS Communication Cord Shell Grommet |
| 48 | PAC-001.VC/KNOB | Knob Gnarled 0.125-Metal for Volume Control |
| 49 | PANR-4213 | Lightspeed Contoured Ear Cups (Left & Right) |
| 50 | PANR-4235 | Lightspeed Kevlar Cable with 6-Pin LEMO, Quick Disconnect, Accessories, and Standard Controller |
| 51 | PANR-4623GA | Lightspeed Kevlar Cable with GA, Quick Disconnect, Accessories, and 5 OHM Controller |
| 52 | PANR-4234 | Lightspeed Kevlar Cable with GA, Quick Disconnect, Accessories, and Standard Controller |
| 53 | PANR-4623L | Lightspeed Kevlar Cable with LEMO Quick Disconnect, Accessories, and 5 OHM Controller |
| 54 | PANR-4623 | Lightspeed Kevlar Cable with U174, Quick Disconnect, Accessories, and 5 OHM Controller |
| 55 | PANR-4239 | Lightspeed Kevlar Cable with U174, Quick Disconnect, Accessories, and Standard Controller |
| 56 | PANR-LZ-A493 | Lightspeed Premium Ear Seals, Pair |
| 57 | PANR-LZLO | Lightspeed Zulu ANR Parts and Install, Low Impedance |
| 58 | PANR-LZ | Lightspeed Zulu ANR Parts and Install, Standard |
| 59 | PAC-002-M-1/DC | M-1 Amplified Dynamic, David Clark |
| 60 | PAC-M101D5 | M101 Dynamic Mic 5 Ohm |
| 61 | PAC-003/5 | M87/A1C Dynamic Microphone, 5 ohm, for Flex or Twin Rail Boom |
| 62 | PAH-010J | Mic Cord Support Bracket (J Hook) |
| 63 | PAC-007 | Microphone Cable, 13”-14” |
| 64 | PAC-006 | Microphone Boom Support Assembly, Blk |
| 65 | PAC-009TS | Microphone Boom Thumb Screw |
| 66 | PAC-002-M-7/DC | Microphone M-7 Electret David Clark (Thumb Screw) |
| 67 | PAC-002-M-7A/DC | Microphone M-7 Amplified Electret David Clark Non-Thumb Screw |
| 68 | PAC-004F-5X | Ultra Quiet Electret Noise Canceling Microphone for Thumb Screw Flex Boom |
| 69 | PAC-001/VC | Paraclete Comm Cord, 3’ Coiled Down Lead w/ Volume Control Capability |
| 70 | PAC-009R | Regular Twin Rail Ball Joint Microphone Boom |
| 71 | PAE-011/PNT | Standard Kairos Ready Pair of Ear Cups, Crushable |
| 72 | PAE-011/LNT | Standard Kairos Ready, Left Ear Cup, Crushable |
| 73 | PAE-011/RNT | Standard Kairos Ready, Right Ear Cup, Crushable |
| 74 | PAC-001/S | Straight Downlead for SPH Helmets |
| 75 | PAC-001/S-VC | Straight Down Lead with Volume Control Capability |
| 76 | PAC-004F-7X | Ultra Quiet Electret Noise Canceling Microphone for Flex Boom |
| 77 | PAC-003/COBRA | UmeCobra Microphone Dynamic |
| 78 | PAC-002/COBRA | UmeCobra Microphone Electret |
| 79 | PAC-001.VC/V1.1 | Volume Control Knob and Completed Pot Version 1.1 |
| 80 | PAC-009XL | XL Twin Rail Ball Joint Microphone Boom, |
| 81 | PANR-A153 | ZULU Shirt Clip |
| 82 | PAE-002.CP | Chin Pad for Kairos Retention Assembly |
| 83 | PAE-014 | Ear Cup Spacer Kit |
| 84 | PAE-011LZ | Lightspeed Premium Ear Seals, Pair |
| 85 | PAE-002.NP | Nape Pad for Kairos Assembly |
| 86 | PCL-1714 | Nephos Comfort Liner, Large, 1/4” Thick |
| 87 | PCL-1738 | Nephos Comfort Liner, Large, 3/8” Thick |
| 88 | PCL-1712 | Nephos Comfort Liner, Large, 1/2” Thick |
| 89 | PCL-1758 | Nephos Comfort Liner, Large, 5/8” Thick |
| 90 | PCL-1734 | Nephos Comfort Liner, Large, 3/4” Thick |
| 91 | PAE-009G | Paraclete Gel Ear Seal |
| 92 | PAE-009G2 | Paraclete Gel Ear Seal, Pair |
| 93 | PAE-009 | Legacy Ear Seal |
| 94 | PAE-0092 | Legacy Ear Seal, Pair |
| 95 | PAE-010HK | TruA Hush Kit |
| 96 | PAE-010 | TruA Receiver Retainer |
| 97 | PAE-0102 | TruA Receiver Retainer, Pair |
| 98 | PAE-TruC | TruC Ear Seal, 1/2” |
| 99 | PAE-TruC/GR | TruC Glue Ring |
| 100 | PAC-ADPT-BXC1 | 12” Breakaway Extension Cord, Adapter |
| 101 | PAC-PA77S5 | 5 foot Extension Cable, Straight, GA Plug |
| 102 | PAV-003LL1-BL | 6 Base 2.2mm Laser Lens |
| 103 | PAC-ADPT-LEMOGA | 6 Pin LEMO to GA Adapter Powered |
| 104 | PAC-ADPT-LEMOHP | 6 Pin LEMO to Helicopter Plug |
| 105 | PAC-ADPT-ZSH | Adapter Converts a U-174/U to ZSH |
| 106 | PAC-ADPT-H2L6 | Adapter, LEMO 6 pin to Helicopter TP-120 or U/174 Bluelink |
| 107 | PAC-B001 | Bluetooth Adapter |
| 108 | CEP706-ESLB | Box of Slim Ear Tips individually wrapped, Qty: 100 pair Box |
| 109 | CEP706-ESTB | Box of Standard Ear Tips individually wrapped, Qty: 100 pair |
| 110 | CEP706-EMXB | Box of Standard and Slim Ear Tips individually wrapped, Qty: 100 pair |
| 111 | CEP002-EMXT | Mixed Size Ear Tips, 4 Tube |
| 112 | CEP199-ESHP | CEP Ear Tips (Short) 12 pack |
| 113 | CEP199-ESLP | CEP Ear Tips (Slim) 12 pack |
| 114 | CEP199-ESTP | CEP Ear Tips (Standard) 12 pack |
| 115 | CEP.HT | CEP Hear Through System with Install |
| 116 | CEP900-I04 | CEP Interface, SMB recessed bulkhead jack for helmet |
| 117 | CEP508-C15-R1 | CEP Mini, Single Point Dual Cable |
| 118 | CEP100-I03 | Interface, IHADSS |
| 119 | PFL-5 | Finger Light, Green |
| 120 | PAC-ADPT-GA | General Aviation Adapter, Converts Helicopter Plug to GA |
| 121 | NVG-GPM1 | GoPro Mount, Plunger Style |
| 122 | PAC-ADPT-U174 | Helicopter Adapter, Converts General Aviation to a U-174/U Helicopter Plug |
| 123 | PAC-ADPT-LEMO6 | Helicopter TP-120 to 6 pin LEMO Adapter |
| 124 | PAC-ADPT-LEMO | Helicopter U-174U plug to 10-pin LEMO Adapter Cable 18” |
| 125 | PAC-ADPT-CEP3.5 | Helmet CEP (SMB) Jack to 3.5 mm Jack 3” Adapter Cable |
| 126 | PAC-ADPT-HL | High to Low Impedance Plug, Accessory |
| 127 | PAC-ADPT-IVC | Inline Volume Control Adapter |
| 128 | NVG-268471-1 | Low Profile Battery Pack Mounting Kit, Dovetail |
| 129 | PAC-ADPT-LH | Low to High Impedance Plug, Accessory |
| 130 | PAC-ADPT-LHS | Low to High Impedance Switch, Accessory |
| 131 | PAH-MFS | Maxillofacial Shield for Aspida helmets |
| 132 | PAH-MFS.HK | Maxillofacial Shield Hardware Kit |
| 133 | PML-18 | Mic Lite – 3 ea. filtered NVIS White LED’s |
| 134 | PML-22 | Mike Lite, 2 NVG Green LED, 1Filtered NVG White LED |
| 135 | PML-21 | Mike Lite, 3 Bright NVIS Green A LEDs |
| 136 | NVG-BP01 | NVG Battery Pack, Low Profile |
| 137 | PAV-101QR | NVG Quick Release, Paraclete |
| 138 | PLS-RAIL1 | Picatinny Rails for the Aspida Helmet, Pair |
| 139 | PLS-PCAP | Pilot’s Skull Cap, One Size Fits All |
| 140 | NVG-QDC-268958-BOTTOM | QDC Pin Bottom Locating (QTY 1) |
| 141 | NVG-QDC-268957-TOP | QDC Pin Top Locating (QTY 1) |
| 142 | NVG-AI-RAM/SC | Rugged ANVIS Mount w/ Side Car Plug |
| 143 | NVG.UM | Universal Quick Release Mount with Pins and Backplate for Non-NVG Visor Covers |
| 144 | CEP508-KO4-R1 | CEP Shell Interface Kit with Standard CEP, Interface, and Mixed Tips |
| 145 | PAH-HB103 | Helmet Bag, Black |
| 146 | PLS-BW1 | Weight Bag 4” × 4” |
| 147 | ASP-HDW-KIT | Aspida Retention Hardware Kit (Stainless Steel Screw & Posts) |
| 148 | TR-CL1 | ALSE CERTIFIED TRAINING CLASS, LEVEL II MAINTENANCE, UP TO 10 PEOPLE WITHIN THE US 48 |
| 149 | TR-CL1.1 | ALSE CERTIFIED TRAINING CLASS, LEVEL II MAINTENANCE, UP TO 10 PEOPLE WITHIN HI OR AK |
| 150 | TR-CL1.2 | ALSE CERTIFIED TRAINING CLASS, LEVEL II MAINTENANCE, UP TO 10 PEOPLE WITHIN NORTH AMERICA OUTSIDE OF THE US |
| 151 | TR-CL1.3 | ALSE CERTIFIED TRAINING CLASS, LEVEL II MAINTENANCE, UP TO 10 PEOPLE OUTSIDE OF NORTH AMERICA |
| 152 | TR-CL2 | ALSE CERTIFIED TRAINING CLASS, LEVEL II MAINTENANCE, LOCAL TRAINING EVENT |
| 153 | PAE-002.BUCKLE | Buckle: Chin Strap |
| 154 | PLS-106/BE | Custom Branding, Embroidery |
| 155 | PLS-106/BD | Custom Branding, Water Decal |
| 156 | PLS-103/P | Custom Paint Helmet & Visor Cover |
| 157 | PAE-002.FIDLOCK | Fidlock Hook, Aluminum |
| 158 | HTIC-6 | Headset – Helmet Intercom Tester |
| 159 | AMTC-K1300 | Helmet Communications Tester |
| 160 | PLS-INSP | Helmet Inspection, Annual |
| 161 | PLS-VD | Hook Dot Fastners QTY4 per |
| 162 | PLS-JSDS | Jeweler’s Screw Driver Set, Tool |
| 163 | QR Plate Labor | Labor to Install Q.R. Attachment Plates |
| 164 | PLS-MCT | Micro Cutter, Tool |
| 165 | PLS-SC6T | 6N1 Screwdriver, Tool |
| 166 | PLS-NNT | Needle Nose, Tool |
| 167 | P58311 | Paraclete Carbon Shell for Aspida |
| 168 | P58311R.GW | Paraclete Carbon Shell for Aspida, Gloss White REG |
| 169 | P58311X.GW | Paraclete Carbon Shell for Aspida, Gloss White XL |
| 170 | P58311R.MC | Paraclete Carbon Shell for Aspida, Matte Carbon REG |
| 171 | P58311X.MC | Paraclete Carbon Shell for Aspida, Matte Carbon XL |
| 172 | PVX1.GW | Paraclete Carbon Visor Cover, Non-NVG Gloss White |
| 173 | PVX1.MC | Paraclete Carbon Visor Cover, Non-NVG Matte Carbon |
| 174 | PVX1 | Paraclete Carbon Visor Cover, Non-NVG, Painted |
| 175 | PVX2.GW | Paraclete Carbon Visor Cover, NVG Gloss White |
| 176 | PVX2.MC | Paraclete Carbon Visor Cover, NVG Matte Carbon |
| 177 | PVX2.QRC | Paraclete Carbon Visor Cover, with Paraclete NVG Quick Release, Carbon Fiber |
| 178 | PVX2.QR | Paraclete Carbon Visor Cover, with Paraclete NVG Quick Release, Painted |
| 179 | PLS-PLEX13 | Plexus 13 oz Polycarbonate Cleaner |
| 180 | PLS-101/P | Prep & Paint New Helmet Shell, Non-Standard Colors |
| 181 | PLS-102/P | Prep & Paint New Visor Cover, Non-Standard Colors |
| 182 | PLS-REF | Refurbish Helmet |
| 183 | PLS-8-32×1/4 | Screw, 8-32 × 1/4”, SS, Black Oxide Coated, Front Retention Assembly, Nylon Patch, Truss Head, Phillips |
| 184 | PLS-8-32×3/16 | Screw, 8-32 × 3/16”, SS, Black Oxide Coated, Rear Retention Strap and Strian Relief |
| 185 | PLS-LTK | Shock (ea) Liner Installation Tool |
| 186 | PAH-004XXL | ShockLiner, Energy Absorbing Liner, 2XL |
| 187 | PAH-004R45 | ShockLiner, Energy Absorbing Liner, REG DOI Version |
| 188 | PLS-SCT | Spring Clamp |
| 189 | PLS-HWP-1/16 | SS Retention Post, 1/16” |
| 190 | PLS-HWP-1/4 | SS Retention Post, 1/4” |
| 191 | PLS-HWP-1/8 | SS Retention Post, 1/8” |
| 192 | PLS-TTC | Training Tool Case, 12” plus, Tool |
| 193 | PAE-002/K-9DT | Transitional DOI Version of 9” Kairos |
| 194 | PAH-TRIM | Trim Lock Protective Edging |
| 195 | PAH-TRIMB | Trim Lock Protective Edging, Box of 250 ft |
| 196 | PLS-VL3×2 | Velcro® Loop Pre-Cut 3×2 |
Paraclete Parts Page: https://paracletelifesupport.com/product-category/store/helmet-parts/
Last modified:
Sep 18, 2024
Publique seu Comentário