Battery for the cattle collar: The battery has six 18650 Li-Ion cells. A fully charged battery is at 20,000 mAh, and takes fourteen hours to charge. The battery has an IP rating of 67.
The battery is clicked out by pressing the green buttons on both sides of the collar simultaneously. You will have to press with some force in order to release the button. If dust and debris collects around the button, press the button out, dismantle, and wash it for easier use. The collar should play the startup melody when a charged battery is inserted.
It is not possible to contact the collar via the mobile app unless the battery has sufficient power.
Battery for the sheep and goat collar: The battery has three 18650 Li-Ion cells. A fully charged battery is at 10,000 mAh, and takes eight to ten hours to charge. The battery has an IP rating of 67.
To switch the collar on, simply click the battery into the battery slot. To switch it off, take the battery out of the slot again. Make sure the battery sits well, you should hear a click as you insert it. You can change the collar’s battery without taking the collar off of the animal.
It is not possible to contact the collar via the mobile app unless the battery has sufficient power.
