The following example shows how to set the date to:
16 February 2018 (16.02.2018) in European format.

The 1st digit is
flashing.
  1. Press READ until “1” appears as the first digit.
  2. Press SET to save.
The 2nd digit is flashing.
  1. Press READ until “6” appears as the second digit.
  2. Press SET to save
The 3rd digit is flashing.
  1. Press READ until “0” appears as the third digit.
  2. Press SET to save.
The 4th digit is flashing.
  1. Press READ until “2” appears as the fourth digit.
  2. Press SET to save.
    Note: The fifth and the sixth digit are set automatically.
The 7th digit is flashing.
  1. Press READ until “1” appears as the seventh digit.
  2. Press SET to save.
The 8th digit is flashing.
  1. Press READ until “8” appears as the eighth digit.
  2. Press SET to save.

The date is now set to: 16.02.2018.

Note: After setting the date, the first digit of the time will start flashing.

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.