Pulseroller Products / Motor Rollers
| General Specifications | Senergy | Senergy-Ai | Senergy-Ai-48 | Senergy-IDC | HBR |
| Available Tube Diameters | 48.6 mm (1.9”) 50 mm (1.97”) 60.5 mm (2.38”) |
||||
| Maximum Tube Length | 1000 mm (39”) | ||||
| Motor Cable Length | 600 mm (24”) | 1000 mm (39”) | 500 mm (20”) | 1000 mm (39”) | |
| Motor Controller Connection | 9 Pin JST | 4 Pin M8 | 5 Pin M8 | 4 Pin M8 | |
| Speed Codes Available | 10, 15, 20, 25, 35, 45, 60, 75, 95, 125, 175, 215 | 15, 20, 35, 45, 60 | 15, 20, 35, 45, 60, 95 | 45:1, 18:1, 11:1 | |
| Washdown Model Available | Yes | No | Yes | ||
| Freezer Model Available | Yes | ||||
| Mechanical Holding Brake Option | Yes | No | Included | ||
| Ambient Temperature | -10 ~ 40º C (14 ~ 104º F) | ||||
| Ambient Humidity | 10 ~ 90 RH (No Condensation) | ||||
| Certifications | CE, UKCA, RoHS, IP54 UL Recognized to UL 1004-1 |
CE, UKCA, RoHS, IP54 | |||
| Input Voltage | 24 VDC | 48 VDC | 24 VDC | 24/48 VDC | |
| Nominal Power Output | 40W (50W in BOOST Mode) | 50W | 38W | N/A | |
| Rated Current | 2.5A (3.5A in BOOST Mode) | 1.6A | 2.4A | N/A | |
| Starting Current | 5A BOOST Mode / 8A BOOST-8 Mode | 4.0A | 3.0A | N/A | |
| Maximum Motor RPM | 5800 ECO / 4200 BOOST & BOOST-8 | 7000 | 5800 | N/A | |
| Minimum Motor RPM | 580 | N/A | |||
| Minimum Duty Cycle | 0.5 sec ON / 0.5 sec OFF (1.5 sec OFF when in BOOST-8 Mode) |
0.5 sec ON / 0.5 sec OFF | |||
| Continuous Operation | At rated load/current in ECO Mode | No overheat at rated load/current | N/A | ||
| Compatible Controls | ConveyLinx ConveyLinx-HTF ConveyLinxE ConveyLinxE-HTF E-QUBE EZ-QUBE EZ-QUBE-W EZ-QUBE-HTBF |
ConveyLinx-Ai2 ConveyLinx-Ai3-24-FC ConveyLinx-Ai3-24-RC MotionLinx-Ai E-QUBE-Ai EZ-QUBE-W-Ai |
ConveyLinx-Ai2-48 ConveyLinx-Ai3-48-FC |
Any 3rd Part Control that provides: Pin 1: +24V Pin 2: Direction Pin 3: Gnd Pin 4: Error Pin 5: Analog Speed |
ConveyLinx-Ai2 ConveyLinx-Ai2-48 ConveyLinx-Ai3-24-FC ConveyLinx-Ai3-24-RC ConveyLinx-Ai3-48-FC MotionLinx-Ai |