Pulseroller Products / Pulse Gear Drive (PGD) 24V/48V
| General Specifications | PGD | PGD-Ai | PGD-Ai-48 | PGD-IDC |
| Shaft Diameter | 16 mm | |||
| Keyway | 5 × 5 × 25 | |||
| Motor Cable Length | 600 mm (24”) | 1000 mm (39”) | 500 mm (20”) | |
| Motor Controller Connection | 9 Pin JST | 4 Pin M8 | 5 Pin M8 | |
| Washdown Model Available | No | Yes | No | |
| Freezer Rated Model Available | No | |||
| Mechanical Brake Option | Yes | No | ||
| Ambient Temperature | -10 ~ 40º C (14 ~ 104º F) | |||
| Ambient Humidity | 10 ~ 90 RH (No Condensation) | |||
| Certifications | CE, UKCA, RoHS, IP54 | |||
| UL Recognized to UL 1004-1 | ||||
| ETL Listed to UL 1004-1 & UL 1004-6 | ||||
| Input Voltage | 24 VDC | 48 VDC | 24 VDC | |
| Nominal Power Output | 40W (50W in BOOST Mode) | 50W | 38W | |
| Rated Current | 2.5A (3.5A in BOOST Mode) | 1.6A | 2.4A | |
| Starting Current | 5A BOOST Mode / 8A BOOST-8 Mode | 4.0A | 3.0A | |
| Maximum Motor RPM | 5800 ECO / 4200 BOOST & BOOST-8 | 7000 | 5800 | |
| Minimum Motor RPM | 580 | |||
| Minimum Duty Cycle | 0.5 sec ON / 0.5 sec OFF (1.5 sec OFF when in BOOST-8 Mode) |
0.5 sec ON / 0.5 sec OFF | ||
| Continuous Operation | At rated load/current in ECO Mode | No overheat at rated load/current | ||
| Compatible Controls | ConveyLinx ConveyLinx-HTF ConveyLinxE ConveyLinxE-HTF E-QUBE EZ-QUBE EZ-QUBE-W EZ-QUBE-HTBF |
ConveyLinx-Ai2-48 ConveyLinx-Ai3-48-FC |
Any 3rd Part Control that provides: Pin 1: +24V Pin 2: Direction Pin 3: Gnd Pin 4: Error Pin 5: Analog Speed |
|