Pulseroller Products / Motor Rollers / Part Number Definition / Senergy/Senergy-Ai 24V/48V
Part Number Definition for Senergy 24V / Senergy-Ai 24V / Senergy-Ai 48V Motor Rollers
① | ② | ③ | ④ | ⑤ | ⑥ | ⑦ | ⑧ | |||||||||||
P | R | – | A | D | – | 4 8 | – | 5 0 0 | – | 4 5 | Z | S | G | Q | ||||
PULSEROLLER Family |
Model | DC | Roller Diameter | Roller Length | Speed Code | ↑ | Motor Type |
↑ | Shaft & Custom Options |
|||||||||
Material & Lagging Options | Interlock Options | |||||||||||||||||
① Model | ||||||||||||||||||
A – Standard | B – Built-in Brake | |||||||||||||||||
D – Dual Drive | V – NSF Certified Wash-Down (IP66 w/ NBR seals) | |||||||||||||||||
W – Wash-Down Rated (IP66 w/ NBR seals) | Q – Enhanced Wash-Down (IP69K w/ Viton seals) | |||||||||||||||||
Z – Freezer Rated | ||||||||||||||||||
② Roller Diameter | ||||||||||||||||||
48 – 48.6 mm (1.9”) | 60 – 60.5 mm (2.38”) | |||||||||||||||||
50 – 50 mm (1.97”) | ||||||||||||||||||
③ Roller Length (mm) – Available in 1 mm increments | ||||||||||||||||||
Formulas for Roller Length (RL) based upon Between Frame (BF) dimension for proper clearance | ||||||||||||||||||
For Interlocking Options A and G : RL = BF – 8 mm – Customer Required Clearance | ||||||||||||||||||
For Interlocking Options H and F: RL = BF – 35 mm – Customer Required Clearance | ||||||||||||||||||
For most conveyor applications, Customer Required Clearance = 2 mm | ||||||||||||||||||
④ Speed Code | ||||||||||||||||||
Select Speed Code from the selected Model’s specific Performance Charts | ||||||||||||||||||
⑤ Tube Materials and Lagging Options | ||||||||||||||||||
Z – Steel, Zinc Plating, No Lagging (Standard for Roller Diameters 48 and 50) | ||||||||||||||||||
A – Steel Unichrome Plating, No Lagging (Standard for Roller Diameter 60) | ||||||||||||||||||
A – Stainless Tube (Standard for Models V , W and Q) | ||||||||||||||||||
J – Stainless Tube (Option for Models A , D and B and and Z) | ||||||||||||||||||
B – 3mm Black Rubber Lagging | ||||||||||||||||||
W – ⅛ in. (3.18 mm) Urethane Lagging | Q – 2 mm Grey PVC Sleeve | |||||||||||||||||
K – ⅛ in. (3.18 mm) Kastalon Orange Sleeve | Y – Special | |||||||||||||||||
⑥ Motor Type | ||||||||||||||||||
S – Senergy (DC24V JST Connector) | M – Senergy-Ai (DC24V 4-Pin M8 Connector) | |||||||||||||||||
X – Senergy-Ai-48 (DC48V 4-Pin M8 Connector) | ||||||||||||||||||
⑦ Interlocking Options | ||||||||||||||||||
A – Plain Straight (No Interlocking) | G – Round Grooves | |||||||||||||||||
H – Micro-V Pulley | F – Round Groove Pulley | |||||||||||||||||
Y – Special | ||||||||||||||||||
⑧ Shaft &/or Custom Options (Motor End / Idler End) | ||||||||||||||||||
Q – Non-Threaded Hex / Spring Loaded Hex | B – Double Bearing Pinned Construction | |||||||||||||||||
P – M12 Threaded Hex / Spring Loaded Hex | Y – Special | |||||||||||||||||
Please note that not all combinations of options result in a valid part number. Contact Pulseroller for details |