Pulseroller Products / Pulse Gear Drive (PGD) 24V/48V / Part Number Definition
Part Number Definition for Pulse Gear Drive (PGD) – All Models
① | ② | ③ | ④ | ⑤ | ||||||||||||||
P G D 0 2 4 | – | S E 1 | – | 1 5 | A | A | A | |||||||||||
PULSEROLLER Pulse Gear Drive (PGD) Family | Motor Type | Nominal Gear Ratio | ↑ | Output Shaft Finish |
↑ | |||||||||||||
Brake / Washdown Options | Custom Options |
|||||||||||||||||
① Motor Type | ||||||||||||||||||
SE1 – PGD (24V JST Connector) | SE2 – PGD-Ai (24V 4-Pin M8 Connector) | |||||||||||||||||
SE3 – PGD-Ai-48 (48V 4-Pin M8 Connector) | SE4 – PGD-IDC (24V 5-Pin M8 Connector) | |||||||||||||||||
② Nominal Gear Ratio | ||||||||||||||||||
Select Nominal Gear Ratio from the selected Motor Type’s specific Performance Charts | ||||||||||||||||||
③ Brake / Washdown Options | ||||||||||||||||||
A – Standard (No Brake or Washdown) | B – Holding Brake (Available for Motor Type SE1 only) | |||||||||||||||||
W – Washdown (Available for Motor Types SE2 and SE3 only) | ||||||||||||||||||
④ Output Shaft Finish | ||||||||||||||||||
A – Standard Key-Way (No attachments) | ||||||||||||||||||
H – Pre-Installed Micro-V Hub (Available for Washdown W option only) | ||||||||||||||||||
⑤ Custom Options | ||||||||||||||||||
A – Standard | Y – Special | |||||||||||||||||
Please note that not all combinations of options result in a valid part number. Contact Pulseroller for details |