Consumables

!Only PostProcess approved consumables should be used in the DEMI 400 Series. Using third party consumables may void the warranty on the machine. Safety data sheets will be provided for all purchased consumables.

Detergent

	Wear laboratory-style protective glasses.
	When working with or near detergents, always wear protective gloves.

All detergents will be shipped from PostProcess in 5-gallon buckets and poured into the DEMI 400 Series by hand.

PLM-101-SUB
Typically used for removing PolyJet and similar support material. Refer to the SDS for more information.

PLM-402-SUB
Typically used for removal of uncured Stereolithography (SLA) resin. Refer to the SDS for more information.

PLM-403-SUB
Typically used for removal of uncured Stereolithography (SLA) resin. Refer to the SDS for more information.

PLM-202-SUB
Typically used for Fused Deposition Modeling (FDM) support removal. Refer to the SDS for more information.

Handling and Disposal

The DEMI 400 Series features a removable stainless steel basket with handles for part handling. Plumbing for the DEMI 400 Series is internal to the machine and self-contained with the exception of the drain valve. A garden hose fitting allows for a hose attachment for easy draining. Always dispose of used detergent in an approved hazardous material receptacle. Follow local guidelines for disposal.