When the DEMI 400 Series encounters an alarm or warning condition, a yellow or red hazard symbol will be displayed in the bottom right corner as shown below.
 |
| Alarms/Warnings Indicator |
To see what the alarm is indicating, press the ALARM button to access the Alarms/Warnings screen. Specific indicators are highlighted to indicate what condition the operator needs to address (see example below).
 |
| Alarms/Warnings Detail |
- WARNING (yellow) – A proactive indicator that the system will need attention soon. A cycle can be run with an active warning.
- ALARM (red) – A responsive signal that requires immediate attention. Active cycles will be stopped and no new cycle can start until the alarm is addressed and cleared.
- INACTIVE (grey) – These items are inactive and do not require attention.
Post your comment on this topic.