Otros productos Nayar

4.2. 4.2. Device description

The Multivoltage Binary Board (MBB) ia s device designed to mointor elevator signals. The MBB supports direct connection up to six safety circuit signals from the elevator and ten additional non-safety signals, such as floor indicators, maintenace signals…

Each input supports a wide voltage range. Below, more details on connections and their allowable voltage range can be found:

CONNECTIONS

1 x Rj45 Communication port for gateway 5VDC
1 x Safety Circuit Inputs Voltage range 24 ~ 125 VAC
35 ~ 125 VDC
2 x General binary inputs Voltage range 9 ~ 125 VAC
12 ~ 125 VDC
2 x Relay output Operating range 30 VDC / 10A
250VAC / 10A

POWER SUPPLY

Operating range 5VDC
Consumption 30mA (5VDC)

The MBB must be used in conjunction with the GSR2 gateway to transmit the signals monitored.
Additionally, it features two relays to perform any type of action within the installation

Box contents:

  • MBB
  • Quick start guide
  • RJ45 CAT6 S/FTP 3m cable
  • 1x Satey chain cable 3m
  • 2x General Binary Signals cable 3m
  • 2x Relay connection cable 3m

Thermal Characteristics

Operating range -40ºC ~ 85ºC