7. Specifications

General

• Dimensions: 33” x 14” x 5.5”
• Weight: TX 15lbs; RX 10lbs (weight without optional frame cushions)
• Operating Temperature: -20 to 60°C (-4 to 140°F)
• Storage Temperature: -20 to 60°C (-4 to 140°F); For best results store between 5 to 20°C (41 to 68°F)
• Environmental Resistance: Components used are at least NEMA 4x compliant

Power

• Battery LiMNNi 11.1v 4Ah
• Battery Cycle Life: 80% of initial capacity at 1,000 charge cycles
• Time to charge battery: 3.5 hours
• Temperature range for charging: 0 to 45°C (32 to 113°F)
• Number of TX Measurements starting with fully charged battery: Approximately 40
• Number of RX Measurements starting with fully charged battery: Greater than 80

Operational

• Recommended Minimum Pipe Segment Length: 20 feet
• Recommended Maximum Pipe Segment Length: 800 feet
• Recommended Pipe Flow Levels: Typically less than 50%. Measurements in higher flow levels may also work, but are likely to produce lower pipe assessments.
• Pipe Diameters: 6 to 12”. Measurements in larger and smaller diameter pipes may also work but have not been explicitly included in the current blockage assessment algorithms.
• Pipe Material: PVC, HDPE, Ductile Iron, Concrete, Vitrified Clay, and others.