Option 1:
Display of the device status only on query
The LEDs do not light up after stopping the device. By pressing the READ button once, the status request / alarm identification can be performed at any time. Thus, the status / alarm identification is displayed again every 10 seconds for a duration of one minute. Thereafter, the LED indicator will stop blinking. The status can be shown again by pressing the READ button once more.
Option 2:
Continuous display of the device status
The LEDs blink continuously green for OK or red for ALARM. Thus, the status / alarm identification is displayed by regularly blinking according to optional programmed intervals of 15, 30 or 60 seconds. (see Chapter: Alarm identification)
Note: The continuous LED status is terminated when the battery capacity is low. The query is still possible by pressing the READ button until the battery capacity is completely exhausted.
