Delivery status
The Berlinger Mini-tag is delivered in inactive mode. Any customer-specific alarm configurations have been factory pre-programmed. Currently, no temperature data is being recorded. The Berlinger Mini-tag must be started before the measurement mode starts (see Chapter Activation).
Quality test
The device has passed the necessary high-quality controls at the manufacturer. For the avoidance of transport damage, we recommend checking the following points before using the Berlinger Mini-tag:
- The LED displays on the front of the panel are not blinking
- All components as described under Point “Device Explanation” are available.
Device Explanation
1. | STOP break off tab |
2. | LEDs (green = OK / red = ALARM) |
3. | 2D Code contains the following information:
|
4. | READ button (for status query, optional to start / stop) |
5. | START break off tab |
Alarm programming
Three different alarm limits can be programmed. Alarm limits can be defined with temperature and time (cumulative or single event). The alarm limits are programmed at the factory and cannot be changed upon receipt of the device.