Activation process

The Berlinger Mini-tag temperature indicator starts the temperature-measuring operation by breaking off of the START break-off tab or by pressing and holding the READ button for at least 3 seconds. The desired method of activation is defined upon ordering.

Activation option 1:
By breaking the START break-off tab (standard)

	The device is started by the START break-off tab (the tab is labelled BREAK TO START) being completely broken off.
Start confirmation: green blinks 10 times	The successful activation is confirmed by the green LED indicator (OK) blinking 10 times. (see Chapter LEDs: Explanation of the “start confirmation” blink sequences)

Activation option 2:
By pressing the READ button

	The device is started by pressing the READ button (with the edge of a fingernail) for at least 3 seconds.
Start confirmation: green blinks 10 times	The successful activation is confirmed by the green LED indicator (OK) blinking 10 times. (see Chapter LEDs: Explanation of the “start confirmation” blink sequences)

Note: Once the device is activated, the Berlinger Mini-tag immediately monitors the programmed temperature limits and registers any violation of a temperature limit.