Module Hardware /
Technical Specifications
Input Power Supply Requirements | 24.0VDC +15% / – 25% | |
Input Protection Rating | Class III | |
Standby Current Consumption | < 30 mA without Motor | |
Built-in Current Limits | Max. Peak Current | 16 A |
Max. Starting Current ECO Mode | 3 A | |
Max. Rated Current ECO Mode | 2.5 A | |
Max. Starting Current BOOST Mode | 5 A for 1.5 sec. | |
Max. Rated Current BOOST Mode | 3.5 A | |
Max. Starting Current BOOST 8 Mode (EZ-QUBE-HTBF-P, -N Only) |
8 A for 1.5 sec. | |
Max. Rated Current BOOST 8 Mode (EZ-QUBE-HTBF-P, -N Only) |
3.5 A | |
Max. Starting Current BOOST 7 Mode (EZ-QUBE-W, -W-Ai Only) |
7 A for 1.5 sec. | |
Max. Rated Current BOOST 7 Mode (EZ-QUBE-W, -W-Ai Only) |
3.5 A | |
Motor PWM Frequency | 33.3 kHz +/- 0.1% | |
Digital Input Minimum ON Current | 1.5 mA | |
Digital Input Maximum OFF Current | 0.4 mA | |
Initialization Time | <= 20 msec from power on | |
Motor Start Response | <= 5 msec | |
Storage Temperature | -40ºC to 85º C ( -40ºF to 185ºF) | |
Ambient Operating Temperature | -10ºC to 40ºC ( 15°F to 104°F) | |
-25ºC to 40ºC ( -13°F to 104°F) (EZ-QUBE-HTBF-P, -N Only) |
||
Humidity | 5% to 95% non-condensing | |
Enclosure IP Rating | IP20 – Indoor Use Only | |
Altitude | up to 2000m | |
Environmental Pollution | Class 2 | |
Weight | Approximately 70g | |
Bluetooth Specification (EZ-QUBE-W and -W-Ai Only) |
● Bluetooth 4.2 ● Bluetooth Low Energy (BLE) standard ● Enhanced Power Control ● Up to +12 dBm transmitting power ● Adaptive Frequency Hopping (AFH) ● High-speed UART HCI, up to 4 Mbps |