| |
Right Sensor Port Pin-Out |
| |
| Removable Plug Connector Pin-Out |
| Sensor Connector Plug |
| Part Number |
Degson 8EDGK-25-04P-11 |
| Wire Size |
28 – 20 AWG (0.2 – 0.5 mm 2) |
| Strip Length |
5 – 6 mm |
Sensor Port Pin Out
| Pin |
Signal |
Description |
| 1 |
24VDC |
Module 24VDC Supply |
| 2 |
SEN |
Logical Input for Sensor’s state output – Autodetect for NPN or PNP |
| 3 |
GND |
Module DC Common |
| 4 |
AUX |
Auxiliary Input – Auto detect for NPN or PNP – Function configured with EasyRoll software |
!Shorting Pins 1 & 3 (24VDC and GND) may damage the port’s Sensor Detect circuit. If this circuit is damaged, the module will no longer properly detect a connected sensor and will not properly Auto-Configure.
このトピックへフィードバック