4.5. Power Supply Sizing

The ConveyLinx-ECO module provides the Senergy ECO performance. The ConveyLinx-ECO module has an associated rated current that the motor will draw at rated torque and maximum speed as well as an associated allowed current draw that is available for a period of time upon the initial starting of the motor. Theses current values and starting times are shown in the following chart:

*Please note that the current values shown are per Motor Port, so if both Motor Ports are being used on a given ConveyLinx-ECO, the current load seen by the power supply for that module will be double the value shown.

*The current values are at rated speed and at rated torque. The actual current seen at the power supply will be less if rated torque is not required by the motor.