English
Japanese
ConveyLinx-Ai Family Complete Guide
1.7
3.1
3.0
2.1
2.0
1.7
Table of Contents
ConveyLinx-Ai Family Complete Guide
1.7
ConveyLinx-Ai Family Complete Guide — 3.1
ConveyLinx-Ai Family Complete Guide — 3.0
ConveyLinx-Ai Family Complete Guide — 2.1
ConveyLinx-Ai Family Complete Guide — 2.0
ConveyLinx-Ai Family Complete Guide — 1.7
1.
About This Manual
2.
Glossary of Terms
3.
Getting Started
4.
Module Hardware
4.1.
Identifying Module Components
4.2.
Mounting Dimensions
4.3.
Motor Ports
4.4.
Sensor Ports
4.4.1.
Electrical Connections for Sensor Port Aux I/O
4.5.
Ethernet Ports
4.6.
Power Connections
4.7.
Power Supply Sizing
4.8.
LED Status Indicators
4.9.
Technical Specifications
5.
Auto-Configuration
5.1.
Device Connections to Modules
5.1.1.
Examples that will generate errors
5.2.
Motor Rotation Definition
5.3.
Node Connections for a Subnet
5.4.
Installing EasyRoll
5.5.
ConveyLinx Ethernet Definition
5.6.
Connecting Your PC to the Network
5.7.
Auto-Configuration Procedure
5.8.
Expected Results
5.9.
What to do if things go wrong
6.
Default Settings and Operation
6.1.
Singulation Release Mode
6.2.
Flex Zone Recognition
6.3.
Jam Conditions
6.3.1.
Arrival Jam
6.3.2.
Sensor Jam
6.4.
Automatic Module Replacement
6.5.
Reset to Factory Default Settings
7.
EasyRoll Software
7.1.
Main Screen
7.1.1.
Node Navigation
7.1.2.
Node Identification
7.1.3.
ZPA Upstream/Downstream Zone Settings
7.1.3.1.
Release Mode
7.1.3.1.1.
Singulation Release
7.1.3.1.2.
Train Release
7.1.3.1.3.
GAP Train Release
7.1.3.2.
T-Zone Settings
7.1.3.3.
ZPA Error and Information
7.1.3.4.
Accumulate Control from Main Screen
7.1.3.5.
Settings Checkboxes
7.1.3.5.1.
Disable Reset Delays
7.1.3.5.2.
Disable Sensor Jam Auto Clear
7.1.3.5.3.
Disable Arrival Timeout
7.1.3.5.4.
Disable Manual Operation
7.1.4.
Motor Settings
7.1.4.1.
Motor Type
7.1.4.2.
Brake Method
7.1.4.3.
Speed
7.1.4.4.
Rotation Direction
7.1.4.5.
Acceleration/Deceleration
7.1.4.6.
Motor Jog and Error Indicators
7.1.5.
Diagnostic Window
7.2.
Advanced Dialog
7.2.1.
Look Ahead and Timing Tab
7.2.1.1.
Look Ahead Slowdown Feature
7.2.1.2.
Jam & Auto Clear Timers
7.2.1.3.
Run After Time/Distance
7.2.1.4.
Induct Forward Time/Distance
7.2.1.5.
Sensor Debounce
7.2.2.
Upgrade Tab
7.2.3.
Connections Tab
7.2.4.
Network Services Tab
7.2.4.1.
Discover & IP Address Set
7.2.4.2.
Backup & Restore
7.2.5.
Special Services Tab
7.2.6.
Flex Zone Tab
7.2.7.
Sensors Tab
7.2.8.
Extensions Tab
7.2.9.
Pin 2 Usage Tab
7.2.9.1.
Most Downstream Zone
7.2.9.2.
Most Upstream Zone
7.2.9.3.
Accumulate Intermediate Zone
7.2.9.4.
Lane Full Interface
7.2.9.5.
Most Upstream Zone Handshake Interlock
7.2.9.6.
Most Downstream Zone Handshake Interlock
7.2.9.7.
Inverting the Pin 2 Signals
8.
IOX Interface Module
8.1.
Wake up and/or Lane Full Interface
8.2.
Wake up/Lane Full with Wired Terminals
8.3.
Wake up/Lane Full with Discrete Signals
8.4.
Wake up/Product on Zone Handshake Interlock
8.5.
Downstream/Product on Zone Handshake Interlock
8.6.
Pin 2 Output on Aux I/O M8
8.7.
Pin 2 Output on Wired Terminals
Download as PDF
8.6.
Pin 2 Output on Aux I/O M8
8.5.
Downstream/Product on Zone Handshake Interlock
8.7.
Pin 2 Output on Wired Terminals
8.5.
Downstream/Product on Zone Handshake Interlock
8.7.
Pin 2 Output on Wired Terminals
