Carbon Offsets
Scope of Carbon Offset
Project teams are to assess embodied carbon impacts in the context of all opportunities available, including material reduction and reuse strategies. Carbon offsetting does not reduce upfront carbon and is considered a last resort, only after all other measures to avoid or reduce emissions have been exhausted.
Approved carbon offsets must be procured to cover the total embodied carbon of the project, including impacts from construction and from new or refurbished materials. When calculating the project’s embodied carbon, project teams should include the primary materials and interior materials used on the project seen in table ZC-4. The embodied carbon values may be calculated individually or exported as a subset from the project’s LCA calculations.
If a project uses carbon-sequestering materials, the benefit of those materials can be included in the total embodied carbon quantity calculations. Projects with calculations that prove a net carbon-neutral or carbon-sequestering value based on their materials are not required to procure additional carbon offsets.
Approved Carbon Offsets
Carbon offsets must be certified by Green-e Climate, or verified under programs and crediting methodologies that are Core Carbon Principles (CCP) approved by the Integrity Council for the Voluntary Carbon Market. Validation and Verification Bodies (VVBs) must be accredited under ISO 14065. Credits must be attributed to the project and retired on its behalf.
Prohibited Carbon Offsets
The carbon-reducing function of on-site elements, such as native landscapes, may not be applied to the project as a carbon offset or otherwise accounted for in calculating the embodied carbon footprint of the project. Renewable Energy Certificates (RECs) are not acceptable alternatives for carbon offsets.
Applicable Building Materials
For the purposes of assessing the total embodied carbon that must be offset, all permanently installed materials that represent the majority of material quantities and costs associated with the project must be included. All temporary materials, building systems, interior furnishings, equipment, site work, and small or miscellaneous products are optional to include in the assessment.
Materials that account for the largest quantities within each assembly should be prioritized for reduction, with a focus on achieving the most impactful reductions. Emphasis should be placed on reducing the embodied carbon in the bulk materials listed in table ZC-4.
Calculations do not need to include materials that would create an undue burden to calculate, such as small and miscellaneous materials for which embodied carbon data are not readily available. This includes materials such as adhesives, fasteners, wet-applied coatings, and hardware. Project teams should use their best judgment and include materials that are representative of the carbon impact of the assembly.
See the Resources section for documents that provide guidance on handling detailed subassemblies, specifically RICS Whole Life Carbon Assessment for the Built Environment.
Table ZC-4 Applicable Building Materials
