The spineROM scan is performed by taking readings from three different tests, in any order. You can cycle between the tests, and re-do them whenever you need. The most recent scan data will be used in the final report.
- To begin, choose one several available tests in the following areas and hit connect to spineROM (Fig. 1) (Fig. 2):
- Cervical
- Thoracic
- Lumbar
- Have the patient hold their normal upright posture of the respective test selected.
- Click the “Save Neutral Position” button (Fig. 3).
- Now, have the patient perform the controlled specified range of motion, gently coming back to neutral, pausing, and then completing the extension and finishing by coming back to neutral.
- After this motion, choose Finish Test (Fig. 4).
- If satisfied, you can click any of the next tests, in any order.
- Otherwise, you can hit “Retake Test” and redo the last completed test. This overwrites the undesirable result (Fig. 5).