The Clock Source allows either the local clock or another clock source to schedule Multi Controller mappings.
- Allow Learn Input: If enabled, the input can be used to automatically assign to a mapping with the learn button. It is advisable to disable allow learn input on sources that are constantly sending data as it will interfere with other sources associating.
- Create Enable Pin: Creates a new pin (Bool) to allow the controller to be turned on or off.
- Use Custom Pin Name: Allows user to name the enable Pin.
- Data Type: A drop down for the user to select the data type.
- Network Interface: Select which adaptor to listen to, alternatively all adapters can be selected.
- Multicast IP: If using multicast the user can set the IP address here.
- Listen Port: Which port the Reader needs to listen to.
- Update Frequency: A user defined frequency of which data will be checked for updates.
- Process All Values: Forces all values to be updated even if they haven’t changed
Post your comment on this topic.