Setting parameters and monitoring status for EZ-QUBE-W and EZ-QUBE-W-Ai modules is performed via a built-in Bluetooth interface. You can use any Bluetooth enabled device to connect to these modules once you download and install our EZ-QUBE Mobile App. The EZ-QUBE Mobile App is available for both IOS and Android operating systems.
Once you start the EZ-QUBE Mobile App, you can choose to Scan the QR Code on the module you want to connect to or Discover modules close to you.
| Scan Barcode From the initial main screen, touch Scan Barcode and it will activate your default QR code scanning app or camera. When connected to the module, the General screen appears |
 |
 |
 |
|
 |
| Discover Modules From the initial main screen, touch Discover and the app will search for modules within its Bluetooth range. The app will then show the EZ-QUBE model, Serial Number, and Firmware revision for each module discovered. Tap the module you want to connect to and when connected to the module, the General screen appears |
 |
|
 |
|
|