Module Hardware
EQUBE Modules are designed to be installed and integrated into the conveyor’s mechanical side frame assembly. The EQUBE Module is a controller for a single Senergy brand Motorized Drive Roller (MDR) or Senergy brand Pulse Gear Drive (PGD) unit.
Module Features
- Over-voltage protection with transient voltage suppressor
- Internal SMD fast 8 Amp fuse
- Protection from over-voltage produced by over-speeding of MDR
- Thermal and Over-Current Protection for module and MDR
- Reverse polarity protection against incorrect wiring of the power terminals
- Sensing and indication of over voltage from power supply and/or MDR (32 Volts)
- Sensing and indication of under voltage from power supply (18 Volts)
- PID speed regulation mode with 32 fixed speed settings
- Adjustable acceleration and deceleration with 16 fixed settings
- Dynamic brake control mode
- Automatic error recovery
- Five status LEDs
- Removable power and control signal terminal blocks
- Motor reversing capability while motor is running.
- Error Output signal and LED indication for module and MDR diagnosis
- Selectable default rotation direction
- Hinged clear protective cover for DIP Switch and LEDs
- Options for PNP or NPN control signal wiring accommodation
- Options for Senergy and Senergy-Ai motor rollers and gear drives