I/O Connector
![]()
*The I/O Connector is the same part number for all E-Qube models
| I/O Connector Plug |
| Part Number |
Pulseroller Order Code: 1397-0001 (Degson 15EDGK-3.5-05P-14) |
| Wire Size |
28 – 16AWG (0.1 – 1.3 mm 2) |
| Strip Length |
5 – 6 mm |
| Max. Tightening Torque |
0.2 Nm |
| Pin |
Signal |
Direction |
Description |
| 1 |
Error |
Output |
Provides +24V or 0V output when Error condition is active |
| 2 |
Run A |
Input |
Accepts +24V or 0V input for run at speed control (see section Run A and Run B Inputs) |
| 3 |
Run B |
Input |
Accepts +24V or 0V input for run at speed control (see section Run A and Run B Inputs) |
| 4 |
Reverse |
Input |
Accepts +24V or 0V input to run motor in opposite direction that is set on DIP Switch 6 |
| 5 |
Common |
PNP Versions |
Provides 0V module power common connection |
| NPN Versions |
Provides 0V module power common connection |
