Auto Setup Controls

The buttons on the right of the screen control access to basic navigation features. HOME – returns to the Home Screen. INFO – for current cycle operational data (see below). SETTINGS – for basic system settings. ALERTS – displays Alarm conditions. (See Alerts)

There are three primary variables that can be selected in the Auto Setup screen. The settings are based on the properties of the parts being finished.

ULTRASONIC LEVEL	Control the intensity of the ultrasonic output. See Processing Guidelines for Ultrasonic % recommendations.
	Key energy sources are ultrasonics agitation and the vortex flow of detergent. Selecting 5% will provide minimal ultrasonics, and 100% provides the highest.
TEMPERATURE	Display of the real time temperature throughout part processing.
	Contact Technical Support for more information on safely adjusting your desired set temperature.
TIME	Part processing will automatically stop once the cycle time expires
	Use the + and – buttons to increase or decrease the cycle time.

Once the desired settings have been selected, the user has the option to start the cycle, save the settings, or open an existing set of processing parameters.

	After adjusting the settings, press the PLAY button to initiate or resume a paused cycle.
	Press SELECT RECIPE to recall previously saved settings.
	Press SAVE to store current settings for future use. See Recipe Management for more information.

*A PostProcess Application Engineer will discuss the optimal settings for your application during the initial setup.