Power and Electrical

The following is required from the customer:

SR008 CE UL/CSA
North America
MODEL -02 -03
Power PH, , PH, ,
Receptacle
Option 1
:
__
:
__

Plumbing and Drainage

The BASE includes 3 plumbing ports on the back of the machine.

  • FILL: auto-fills the chamber with fresh water. This function will typically be used for cleaning the machine periodically.
  • DOSE: auto-doses the chamber with a ratio of water and detergent. The detergent is dosed into the machine via a DOSATRON® (included) manifold from 5-gallon buckets.
  • DRAIN: drains the chamber. The Media Separation Sequence and cartridge filters will remove solids prior to draining.
Example Dosatron Configuration

External Plumbing Requirements

Function Required from Customer
Dosatron inlet Municipal Water Supply
FILL inlet Municipal Water Supply
Connect a splitter to municipal water to supply both the Dosatron and FILL inlets
DRAIN outlet Floor Drain or Waste Container*

Facility and Floor Requirements

  • Sufficiently sized doorways to transport the machine from loading dock to permanent installation location.
  • Smooth, level flooring. The BASE must be placed on a level floor.
  • Sufficient space in installation location for BASE and operator to maneuver around machine during normal operation.
  • Installation area should be spacious and well ventilated.
  • Power disconnects, plumbing, and emergency equipment should be installed in the same room as the BASE.

Ventilation

PostProcess Technologies detergents are a specifically formulated chemistry for maximized 3D printed support removal efficiency. It is recommended that the equipment be located in a well-ventilated room. Specific ventilation requirements can vary widely due to size of the install room, existing ventilation (positive or negative) and differences in individual sensitivities to airborne scents or fragrances.

For more information on the safe use of PostProcess detergents refer to the SDS for the specific detergent used.

Reaktion

War das hilfreich?

Ja Nein
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Hinterlasse einen Kommentar.

Bitte stellen Sie hier keine Supportanfragen.
Your feedback will remain private. Click here to Request Technical Support.

Kommentar senden