GSR Lite

Installation and start-up

  1. Put the device in a comfortable place for manipulation.
  2. Insert a SIM card as indicated.
  3. Connect the 4G antennas. They must always be connected to the device.
  4. Connect the WiFi antennas when connectivity for other devices is needed.
  5. Connect the power supply to a wall plug and DC IN.
  6. Wait until the network LED is ON / blinking to confirm the device has internet access.
  7. In case the device has a pending configuration or update you may see the Sync LED blinking and the device could reboot. Wait until this procedure is complete and after that moment the device will be fully operational.