Time and Timecode are used throughout Hippotizer though they are often confused.
Timecode
To quote the Wikipedia:
A timecode (alternatively, time code) is a sequence of numeric codes generated at regular intervals by a timing synchronization system.
There are several types of timecode commonly used in video, including LTC, MIDI and VITC. In every case, the timecode is received by a hardware or software decoder for translation into Hippotizer’s framework.
Additional information about receiving timecode can be found here.
Timecode in Hippotizer is comprised of two pieces; time and format. Time is simply a clock from 00:00:00;00 to 23:59:59;59 while format indicates the frame rate used such as 25FPS or 29.97.
Hinterlasse einen Kommentar.