The Forward and Aft bilge pumps (12V, 1100GPH) operate automatically by checking for water every 2.5 minutes even with battery switches and breakers in the OFF position. However, the bilge pumps will run continuously once their switches are placed in the ON position. Monitor the outflow accordingly. Do not run when dry. Manual switches are located at the helm for the forward and aft pumps.
The V-berth bilge pump (12V, 900GPH) is activated manually only via the helm switch.
FLUID MOTION - RANGER TUGS, CUTWATER BOATS, SOLARA
Powered by
Powered by