RTV Toolchain Settings

RTV toolchain

To build and run a test in a RTV environment with Controller Tester RTV, you need to set the toolchain (compiler) information for the source file being tested.
This chapter describes how to add, edit, and delete the RTV Toolchain information that has previously extracted from the RTV environment where the Controller Tester RTV Server is installed.
(For extracting toolchain information from your RTV environment, please contact the Technical support contact at the bottom of this document Troubleshooting page.)

Add an RTV toolchain

1. Click the [Add RTV Toolchain] button in the [Window] -> [Preferences] -> [Toolchain] window.
   

*If you do not have a RTV server, the [Add RTV Server] window will appear first.

2. If you select the RTV server in the [Add RTV Toolchain] window, you can see the list of RTV Toolchain extracted from the RTV server. Select the toolchain you want to add and click the [OK] button.
   

3. The toolchain information is imported from the RTV server (Depending on the size of the system header, it may take 1 to 2 minutes). When the operation is completed, you can see that the RTV Toolchain has been added.
   

4. If you select the RTV Toolchain added, you can see that the information of the RTV server is displayed on the [Detail].

Edit an RTV toolchain

1. Select the toolchain to be edited and click the [Edit] button.
   

2. Edit the RTV toolchain information.
3. Click the [Finish] button.

Duplicate an RTV toolchain

The duplication for an RTV toolchain is not provided.

Remove an RTV toolchain

Select the toolchain to delete and click the [Remove] button.

!If you have a project associated with the toolchain you want to delete, you can not use the project normally after deleting the toolchain.

Import/Export an RTV toolchain

The RTV Toolchain can not be imported/exported because it can be added through the RTV server.