English
Korean
Troubleshooting Guides
3.6
2024.12
2024.06
2023.12
2023
3.7
3.6
3.5
3.4
3.3
Table of Contents
Troubleshooting Guides
3.6
Troubleshooting Guides — 2024.12
Troubleshooting Guides — 2024.06
Troubleshooting Guides — 2023.12
Troubleshooting Guides — 2023
Troubleshooting Guides — 3.7
Troubleshooting Guides — 3.6
Troubleshooting Guides — 3.5
Troubleshooting Guides — 3.4
Troubleshooting Guides — 3.3
CT Troubleshooting Guide
How to assign values to flexible array members
How to increase heap memory in JAVA when memory is low
Project DB file (*.csp) is damaged due to abnormal termination
Testrun.exe crashes when testing QNX software
When a specific function is not displayed in the coverage view
If the error message is not displayed after the project analysis fails
The screen is cut off when the Windows display magnification is not 100%
Windows.h file not found
If INFO [ut.hio]: runTest:testrun exit code(105) is displayed in the log and the unit test is not executed
When “Extract Toolchain Info” fails
Messages display abnormally in the error view
When testing with source code containing C++20 items
Errors that may occur during test execution
When cannot find global values after importing integration test
“C2118 : negative subscript” error occurs during test execution
SDK version issue when using Visual Studio 2015 toolchain
Issues during installation of CT
When cannot save a large control flow graph as a image file
When workspace is broken
Error occurs when upload data to VPES
Metric view error
How to check values of local variables and apply to results of test cases
When results of function call coverage and function coverage are not consistent
Issue about expected and output values of floating variables
When fail to import coverages of COVER
Signal error occurs when using a constant address
When comparing a variable of a floating point type, the result is different.
When running tests, test execution fails after build is successful
When only “0” exists in the partition list of the stub variable
When stub input data information is deleted
When a signal error occurs in a function that takes a variable array as an argument
When the size of the structure is different from CT and in the original program
When an undefined referenced error occurs in the IAR environment
When an error occurs in the test code due to the existence of a const global variable
When a signal error occurs when accessing a static const pointer variable
“C2512: No suitable default constructor available.” If an error occurs
How to design stub code that behaves differently for each test case
When perspective of CT is broken
Problem that Korean comments are broken when exporting stub code before CT 3.4 and importing after 3.4
When a value cannot be entered in the test case because the register variable is declared as a macro
How to convert a report in xls format to html format
“LoadLibrary failed with error 87: The parameter is incorrect.” error occurs
Unmanaged code variable list cannot be displayed in the test editor (for versions before CT 3.4)
How to enter invalid values in test data
How to enter a NULL value for a pointer-type parameter
When using the conversion toolchain, the coverages are displayed abnormally in the integration test with the infinite loop removed.
If the file name is truncated when exporting tests
When an error ‘invalid use of void expression’ occurs in the host test using the conversion toolchain
When tests need to be created only for new functions in a recycling scenario
If the color of the covered area does not change when selecting a test case
Problem that the project does not open when changing the version from CT2.9 to CT3.0
How to set only one test case to be created when creating a test
Integrated coverage is displayed as 0 or the execution result is not visible after the test run
(After Ver.3.6) When you want to import test data as ‘overwrite’
If ‘not found virtual address error’ occured after running the test
How to set up Windows 10 Defender when CT execution speed is slow in Windows 10
CT 3.6 패키지 설치할 때 ‘잘못된 디지털 서명’ 오류가 발생하는 경우
CT Target Plug-in Troubleshooting Guide
Build issues after exporting target test code
When the entry point function name is not main (for versions before CT 3.2)
Multiple definition error of the function used to save the target test result (for versions before CT 3.2)
‘sprintf’ has not been declared or CS_FLT_OUTPUT error (for versions before CT 3.2)
Target log interface settings
Check for signal errors
Problems When Testing Functions Related to UART Communication in Target Software
When building with CodeWarrior, test related files such as cs_tfx.c are not found
Target output value does not appear or is output as 0 for float type in CodeWarrior
undefined error of type codescroll_int32 and codescroll_uint32
When cannot use ‘long’ or undefined type to ‘long’ error occurs in codescroll_int, codescroll_uint type
When the address of cs_io_putbyte is not found in Code Composer Studio
When declaration is incompatible with “void cs_io_putbyte” error occurs in GreenHills AdaMulti
TRACE32 related issues
symbol not found error “ct_target_log”
target reset failed
‘&binary_path’ symbol not found or an error occurred at Data.Load.Elf “{file_path}” /LPATH while running the cmm script
Importing target log (test results) issues
Failed or Error When Performing ‘Import Target Test Log’
When the target log buffer size is exceeded
When an exception occurs in the script when running after test building in Code Composer Studio
Fail to import debug information logs in target test
How to read target logs when fail ‘Import Target Test Log’
When log import fails in a normally executed test
Other tips
.map file
TRACE32 debugging
If the output value is different due to the byte order of the host/target environment
Controller Tester package installation/uninstallation guide
If the package remains in Add/Remove Programs even after deleting the package
Download as PDF
TRACE32 related issues
symbol not found error “ct_target_log”
target reset failed
‘&binary_path’ symbol not found or an error occurred at Data.Load.Elf “{file_path}” /LPATH while running the cmm script
When declaration is incompatible with “void cs_io_putbyte” error occurs in GreenHills AdaMulti
symbol not found error “ct_target_log”
Need more help with this?
Don’t hesitate to contact us here.
×
Thanks for your feedback.