If the network is disconnected during work

If the network is temporarily disconnected while working

When the connection between the team project and the team server is temporarily disconnected, the team project attempts to reconnect to the server.
If the reconnection fails, the team project will switch to an unstable connection state, and you will not be able to perform test-related actions.

To solve the problem, the following methods can be attempted:

1. Check the network status and maintain a stable communication state.
2. Check the status of the team test server and keep the team server in a normal state.
3. Verify that the team project has reconnected.
   

If the network is completely disconnected during work

If the team project cannot be connected to the team server, the project cannot perform actions related to testing. A solution is to change the team project to offline mode.

1. Right-click on the team project in the [Test Navigator View] and select [Properties].
2. In [Properties], click on [On/Offline] under [Team Testing].
3. In [Connection Settings], select Offline, then click Apply and Close.

When the network is reconnected, one can switch the team project to online mode and then use it as a team project.

*If there are changes to the team project on the server during the offline period, the local team project can be used after updating.