User Manual Fridge-tag 2 L

Setting the time

This example shows how to set the time to 13:47.

Note: The clock operates as a 24-hour clock
(e.g. 1:47 pm = 13:47).

The 1st digit is flashing:
  1. Press READ until “1” appears as the first digit.
  2. Press SET to save.
The 2nd digit is flashing.
  1. Press READ until “3” appears as the second digit.
  2. Press SET to save.
The 3rd digit is flashing.
  1. Press READ until “4” appears as the third digit.
  2. Press SET to save.
The 4th digit is flashing.
  1. Press READ until “7” appears as the fourth digit.
  2. Press SET to save.

The time is now set to 13:47.

Note: If the device is configured with self-programmable alarm limits proceed with the following chapter Setting the alarm limits.

As soon as the last digit of the time setting is confirmed, the activation is completed.

Internal sensor: Now place the Fridge-tag according to this chapter Placing the Fridge-tag.

External sensor: Connect the device with the external sensor. During max. 1 minute after activation no temperature is displayed on the screen.

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.