This section details the core configuration steps that are required to setup the ActiveControl/HPSM integration.
The Integration configuration is maintained through the SAP standard SM30/31 transactions where table entries can be created and updated.
Configuration Summary
|
Summary | Technical Details | Notes |
---|---|---|---|
1. | Users | ActiveControl HPSM |
Users required in ActiveControl and HPSM for the Integration to work. |
2. | WSDL | BTI_TE_TASK.wsdl | This is required for HPSM to call ActiveControl to update the status. |
3. | Logical Port | HPSM Proxy | |
4. | RFCs | N/A | None are required for this HPSM Integration. |
5. | Number Ranges | /BTI/TE_RF | |
6. | Configuration Tables | /BTI/TE_INT_SYST /BTI/TE_INT_TVARV /BTI/TE_INT_MAPP /BTI/TE_INT_CONV /BTI/TE_INT_CLAS /BTI/TE_INT_COND /BTI/TE_INT_FLDE /BTI/TE_INT_TRIG |
|
7. | Programs | /BTI/TE_INTEG_TRIGGER /BTI/TE_INTEG_SEND |
|
8. | Jobs | Job to run /BTI/TE_INTEG_TRIGGER and /BTI/TE_INTEG_SEND every 10 minutes | |
9. | User Exits | 0992 | Z user exit needed to achieve some of the Customer Requirements. |
Post your comment on this topic.