Pulseroller Products / Motor Rollers /
| General Specifications | Senergy | Senergy-Ai |
| {}>. Available Tube Diameters | \2={}. 48.6 mm (1.9”) 50 mm (1.97”) 60.5 mm (2.38”) |
|
| {}>. Maximum Tube Length | \2={}. 1000 mm (39”) | |
| {}>. Motor Cable Length | {}=. 600 mm (24”) | {}=. 1000 mm (39”) |
| {}>. Motor Controller Connection | {}=. 9 Pin JST | {}=. 4 Pin M8 |
| {}>. Tube Material | \2={}. Stainless Steel – SUS304 | |
| {}>. Bearings & Shaft Materials | \2={}. Stainless Steel – SUS303 | |
| {}>. Ingress Protection | \2={}. IP66 (Model W) IP69K (Model Q) |
|
| {}>. O-Rings & Seals Material | \2={}=. Nitrile (Model W) Viton (Model Q) |
|
| {}>. Mechanical Brake Option | {}=. Yes | {}=. No |
| {}>. Ambient Temperature | \2={}. -10 ~ 40º C (14 ~ 104º F) | |
| {}>. Ambient Humidity | \2={}. 10 ~ 90 RH (No Condensation) | |
| {}>. Certifications | \2={}. CE, UKCA, RoHS, IP54 UL Recognized to UL 1004-1 ETL Listed to UL 1004-1 & UL 1004-6 |
|
| {}>. Input Voltage | \2={}. 24 VDC | |
| {}>. Nominal Power Output | \2={}. 40W (50W in BOOST Mode) | |
| {}>. Rated Current | \2={}. 2.5A (3.5A in BOOST Mode) | |
| {}>. Starting Current | \2={}. 5A BOOST Mode / 8A BOOST-8 Mode | |
| {}>. Maximum Motor RPM | \2={}. 5800 ECO / 4200 BOOST & BOOST-8 | |
| {}>. Minimum Motor RPM | \4={}. 580 | |
| {}>. Minimum Duty Cycle | \2={}. 0.5 sec ON / 0.5 sec OFF (1.5 sec OFF when in BOOST-8 Mode) |
|
| {}>. Continuous Operation | \2={}. At rated load/current in ECO Mode | |
| {}>. Compatible Controls | {}=. ConveyLinx ConveyLinx-HTF ConveyLinxE ConveyLinxE-HTF E-QUBE EZ-QUBE EZ-QUBE-W EZ-QUBE-HTBF |
{}=. ConveyLinx-Ai2 ConveyLinx-Ai3-24-FC ConveyLinx-Ai3-24-RC MotionLinx-Ai E-QUBE-Ai EZ-QUBE-W-Ai |