Safety Reset Button

On serial #‘s 750 and beyond, there will be a SAFETY RESET BUTTON located to the left of the controller touchscreen and below the POWER button.

Power and Emergency Stop Button

How to use the SAFETY RESET BUTTON:

• If the EMERGENCY STOP BUTTON has been pressed, or if system is fully powered down and turned back on; the SAFETY RESET BUTTON will flash a blue light indicating that the machine safety circuit needs to be manually reset prior to operation.
• The safety circuit can be manually reset by pressing on the SAFETY RESET BUTTON with the blue label (as long as the EMERGENCY STOP BUTTON is not still pressed in and illuminated)