A classic example of why you should always hire EIFS professionals for all things EIFS. 10 years down the road, when all the framing below the flashing is rotted out, who will get the blame? The EIFS or stucco guy. Clearly, the problem lies with the roofer and their flashing installation.
Kick-outs or diverters are typically manufactured from a recyclable engineered preformed non-corrosive, non-conductive, UV-resistant, Thermoplastic PolyOlefin (TPO) material designed for extreme weather conditions. They will not rust, corrode or conduct electricity, while their flexible, seamless construction can withstand ice damming and wind-driven rain.
These self-positioning, seamless kick-out diverters are designed for consistent placement to work with multiple roof pitches and remove the guesswork of in-field trial and error, eliminating failures. Proportionally sized to re-direct the large volume water runoff focused at roof eave-to-wall intersections.
- Use at any roof-to-wall intersections
- Designed to divert water into the gutter system
- Ensure that water will not enter the siding
- Reduce the possibility of mold due to water entering walls
- Reduce foundational damage by keeping water routed through the gutter
- Other colors are available upon request.
The proper roof/EIFS termination is critical and should always be installed by qualified professionals.
Need more help with this?
Don’t hesitate to contact us here.
