Controller Properties

Translate Controller

• Path Value: Use this value to move the object or watch it track when Forward data is enabled in Hippotizer.
• Point A PathValue: At this Path value you will be at Point A.
• Translation: This is the position the object is in a Point A.
• Point B Path Value: At this Path Value you will be at Point B.
• Translation: This is the position the object is in a Point B.
  

Rotation Controller

• Path Value: Use this value to move the object or watch it track when Forward data is enabled in Hippotizer.
• Angle Offset: Use this to change where the rotation starts.
• Angle Range: Use this to change the degrees of the rotation.
  

Spline Controller

• Path Value: Use this value to move the object or watch it track when Forward data is enabled in Hippotizer.
• Dynamic Segments: A spline is made up of many small straight lines, we call these segments. Too few it looks jerky, too many it slows performance. Keep it ticked for our best judgement, untick it to choose yourself.
• Tangential: When ticked the object move always facing the lines tangent, when unticked the object will move through the world without rotating.
  

Automation
Each Controller has Automation settings as well. These settings are needed for controlling from Hippotizer.

• Enabled: Allows for control from Hippotizer.
• Hippotizer Index: Each controller needs a unique index to be controlled from Hippotizer, this setting will correspond to a Controller# in Hippotizer.