The aim of this quick start guide is to get you outputing a cube from Hippotizer using SHAPE.
Watch the video or…
- Follow the Steps here: Configure Hippotizer for SHAPE
- Play some media on Mix1.
- Start SHAPE
- Create a Projector and a Box
- Move the Box so the projector can clearly see the box.
- Open Network Manager and Enable the Network
- Your Hippotizer engine should now appear. Press the Add to group button. Close Network Manager.
- Open Output Manager, Select your Virtual projector and Hippotizer Output then press Patch.
- You will now be outputting from SHAPE through Hippotizer.
Move the box around to see its connected.