Setting up the Team Charging Case

Setting up the Team Charging Case

The Team Charging Case is compatible with the Blast Motion sensor. Designed to charge sensor quickly in the Universal Bat Attachment.

How to charge on Team Charging Case

1. Open the Charging Case on the side by flipping the two clips.
2. Grab the power cord from the back of the Team Charging Case.
3. Plug the power cord into the closet electrical outlet.
4. Once plugged in the wireless chargers will be turned on showing a red light.
5. Place the sensor in the Universal Bat Attachment and flip the bottom of the attachment up.
6. Place the sensor in the attachment in the center of the wireless charger where the logo is located with the logo facing up on the sensor.
7. Make sure to press down on the sensor in the attachment to have it hold in the charger.
8. It takes 60 minutes to fully charge the sensor.

• Can charge up to fifteen sensors.

• The sensor battery can last for seven days on standby, but the battery life differs based on usage.

• Please keep the bottom front of the Team Charger Case fan unblocked to keep the system cool. If the system overheats a thermal shutdown will happen.

The LED indicator lights of the Team Charging Case

LED colors:
1. Red LED – The charger is powered on and ready.
2. Blue LED – The sensor is actively charging.
3. Green LED – The sensor is fully charged.

How to use the iPad holder

1. Open the Charging Case on the side by flipping the two clips.
2. Open the top side of the case. Place fingers into two top center fingers and squeeze to pull down on top of chargers.
3. Pull back the two Velcro straps to loosen.
4. Place the iPad in facing down between the two straps.
5. Pull the Velcro straps to tighten and secure the iPad.

How to use the sensor holders

1. Open the Charging Case on the side by flipping the two clips.
2. Open the top side of the case. Place fingers into two top center fingers and squeeze to pull down on top of chargers.
3. Place the sensor in the iPad holder and push in to secure the sensor.

How to use the USB ports

1. Open the Charging Case on the side by flipping the two clips.
2. Grab the power cord from the back of the Team Charging Case.
3. Plug the power cord into the closet electrical outlet.
4. Locate the USB ports between the middle right and left of the chargers.
5. Plug your USB cable into the ports.