Scatter Report

5.3. Scatter Report

1. By clicking on Analysis Tools from the Monitoring Station pop-up menu and selecting the Scatter Report option from the drop-down menu, a new tab will open with the analysis tool:

2. The flow monitoring station attributes (i.e. pipe diameter, pipe roughness coefficient, pipe slope) will auto-populate in the tool if the station has the attributes assigned to it in Station Details. You can also select “Enter [attribute]” from the drop-down menu of the attributes to manually enter a value

3. Enter the time range to be analyzed if you would like to see a time range different than the default of the entire time range

4. To configure the display settings and line configuration of the Scatter Report, left-click the Scatter Plot Curves Configuration button and a pop-up window will appear. Select different tabs to configure the display settings for the plot and a variety of curves:

5. Left-click the Run button to run the tool:

6. You can now view the scatter of the data for the time range chosen:

7. Use the mouse cursor to hover over the scatter on the left-hand side to see the values for manual measurements (red dot) and each line plotted: the Froude curves (green line), the static flow (Iso-Q) lines (yellow line) and the analysis method curves (blue line)

8. Many statistics and key performance indicators (KPIs) can be found in the table displayed at the right-hand of the screen based on depth and velocity sensor values captured within the time range

Please contact Smart City Water if you require any clarification regarding the calculation or interpretation of the output of the analysis tools.