Alarms & Warnings

When the DEMI 400 Series encounters an alarm or warning condition, a yellow or red hazard symbol will be displayed in the bottom right corner as shown below.

Alarms/Warnings Indicator

To see what the alarm is indicating, press the ALARM button to access the Alarms/Warnings screen. Specific indicators are highlighted to indicate what condition the operator needs to address (see example below).

Alarms/Warnings Detail

• WARNING (yellow) – A proactive indicator that the system will need attention soon. A cycle can be run with an active warning.
• ALARM (red) – A responsive signal that requires immediate attention. Active cycles will be stopped and no new cycle can start until the alarm is addressed and cleared.
• INACTIVE (grey) – These items are inactive and do not require attention.

*After correcting an alarm or warning, press the blue RESET button to proceed with the cycle.