If your ATevo is equipped with the Ethernet Communications Adapter (A22) and has Firmware 3.3.0 or later, you may use the Web Server feature which allows you to remotely configure charger settings using a standard web browser.
To enable and use this feature, see the following sections in ATevo Communications manual:
- Section 3.3 – Web Server Hardware Enable
- Section 4.2.7 – Configuring Web Server Ethernet Parameters
- Section 4.3 – Web Server Configuration
- Section 7 – Using Web Server
Last modified:
14 May 2025
Need more help with this?
Don’t hesitate to contact us here.