Notch controls are exposed as pins for control by Hippotizer
10 float and 2 string pins for the loaded Notch effect.
Note: Additional Parameters are supported in the Notch Mix |
Each float control is 16bit internally, but may be controlled as 8 or 16bit by DMX as required.
The name and ordering of parameters are defined by the Notch Block.
Use DMX Offset
- Enable, The DMX channel of parameters will respect the DMX table within the Notch Block
- Disable The default. The DMX channel of parameters will follow parameter ordering as shown in the interface.
Hinterlasse einen Kommentar.