NMEA (GPS)

The Clock Source allows to use either the local clock or another clock source to schedule Multi Controller mappings with.

• Allow Learn Input: If enabled, the input can be used to automatically assign to a mapping with the learn button. It is advisable to disable allow learn input on sources that are constantly sending data as it will interfere with other sources associating.

• Create Enable Pin: Creates a new pin (Bool) to allow the controller to be turned on or off.

• Use Custom Pin Name: Allows user to name enable Pin.

• Data Type: A drop down for the user to select the data type.

• Network Interface: User select which adaptor to listen to or alternatively all.

• Multicast IP: If using multicast the user can set the IP address here.

• Listen Port: Which port the Reader needs to listen to.

• Update Frequency: User defined for the frequency this data will be checked for an update.

• * Process All Values*: