Rules enable you to automate parts of your site based on events or day and time.

Contents

Create a System Rule

  1. Go to Rules and open the System Rules tab.
  2. Tap Edit, then tap Add.
  3. In If, select an event that should trigger a system response.
  4. In Then, select the way the system should respond to the event.
  5. For some rules, you’ll need to select specific doors or users.
  6. For turning an output on or off, indicate the time you want for the rule (1 second min., 16 minute max.). Otherwise the output continues until another rule overrides it.
  7. In Notifications, select the people that you want to notify if this event occurs.
  8. In During, specify a time period to send notifications.
  9. Tap Save.

Create an Auto Lock/Unlock Rule

  1. Go to Rules and open the Auto Lock/Unlock tab.
  2. Tap Edit, then tap Add.
  3. To have the rule occur temporarily, select Temporary Schedule, then select a Start Date and End Date.
  4. In Doors, select the doors that you want the rule to apply to.
  5. In Floors, select the floors that you want the rule to apply to.
  6. In Schedule, schedule the days and times when the rule should run.
  7. Tap Save.

Edit a Rule

  1. Go to Rules.
  2. Select the rule that you want to edit.
  3. Make your changes, then tap Save.

Delete a Rule

  1. Go to Rules.
  2. Tap Edit, then tap Delete.
  3. In the row of the rule that you want to delete, tap Delete.
  4. A dialog pops up to confirm your decision. To delete the rule, tap OK.
  5. Tap Close.