Delete a Z-Wave Device

*Note: In the system’s add-on features, Automation (Lights, Locks, Thermostats, & Appliances) must be enabled before attempting to delete a Z-Wave device.

To delete a Z-Wave device, complete the following steps.

1. Go to Customer Summary > Systems.
2. Select the system that you want to program.
3. Tap Z-Wave.
4. Near the lower right corner, tap Menu.
5. Tap Delete.
6. Tap Remove Device.
7. Follow the onscreen instructions to remove the device.

Force Delete a Z-Wave Device

Caution: You will receive no warning message when force deleting Z-Wave devices. When you tap Delete, the device is immediately and permanently deleted.

Occasionally, you may need to force delete a Z-Wave device from a system when troubleshooting device installation. To force delete a Z-Wave device, complete the following steps.

1. Go to Customer Summary > Systems.
2. Select the system that you want to program.
3. Tap Z-Wave.
4. Swipe left on the device that you want to force delete.
5. Tap Force Delete.

© Digital Monitoring Products, Inc.