To add an NVR or analog converter to a system, complete the following steps.

  1. Go to Customers.
  2. Select the system name.
  3. In Video, select Add NVR/Converter.
  4. Enter the Serial Number found on the NVR label.
  5. Select Next. When the NVR has successfully connected, the NVR Serial Number is assigned.
  6. Select the Time Zone. If necessary, enable Observe Daylight Savings Time.
  7. To create a local user account, enable Local User, then create an NVR Username and Password.
  8. Select Save.

© Digital Monitoring Products, Inc.