To add, edit, or delete a receiver, complete the following steps.

Contents

Add a Receiver

To add a monitoring center receiver, complete the following steps.

  1. In the menu, go to Settings > Monitoring Center.
  2. Select Add.
  3. Enter the receiver’s Receiver Number, Automation Prefix, IP Address, Port, and Monitoring Center. If desired, enter a brief description about the receiver in Description.
  4. Select Save.

Edit a Receiver

To edit receiver settings, complete the following steps.

  1. In the menu, go to Settings > Monitoring Center.
  2. In the row of the receiver that you want to edit, select Settings.
  3. Edit the receiver information as needed, including the Receiver Number, Automation Prefix, IP Address, Port, Monitoring Center, and Description.
  4. Select Save.

Delete a Receiver

To delete a receiver, complete the following steps.

  1. In the menu, go to Settings > Monitoring Center.
  2. In the row of the receiver that you want to delete, select Delete.
  3. A dialog pops up to confirm your decision. To delete the receiver, select OK.

© Digital Monitoring Products, Inc.